Ask.com is the #1 question answering service that delivers the best answers from the web and real people - all in one place. This End-User License Agreement ('EULA') is a legal agreement that you (either an individual or a single entity) have signed for any Laptop Logbook software product, which includes computer software and associated media and printed materials, and may include 'online' or electronic documentation ('SOFTWARE PRODUCT' or 'SOFTWARE').

Electronic Driver Logs Device
Ask Computer Electronic Drivers
Electronic Drivers Log

-->

A boot-start driver is a driver for a device that must be installed to start the Microsoft Windows operating system. Most boot-start drivers are included 'in-the-box' with Windows, and Windows automatically installs these boot-start drivers during the text-mode setup phase of Windows installation. If a boot-start driver for a device is not included 'in-the-box' with Windows, a user can install an additional vendor-supplied boot-start driver for the device during text-mode setup.

To install a device that is required to start Windows, but whose driver is not included with the operating system, a user must do the following:

Install the device hardware and turn on the computer.
Begin your Windows installation (run the Windows setup program). During the text-mode phase of the installation (at the beginning of the installation), Windows displays a message that indicates that you can press a specific Fn key to install a boot-start driver.
When Windows displays this message, press the specified Fn key to install the boot-start driver and then insert a boot-start driver distribution disk.

Note This procedure demonstrates how you can install a driver that is not included 'in-the-box' with Windows. Do not use this procedure to replace or update a driver that is included with Windows. Instead, wait until Windows starts and use Device Manager to perform an 'update driver' operation on the device.

When Windows fails to start, certain error messages that are displayed can indicate that a boot-start driver is missing. The following table describes several error messages and their possible causes.

Error message	Possible cause
Inaccessible boot device	The boot disk is a third-party mass-storage device that requires a driver that is not included with Windows.
Setup could not determine your machine type	A new HAL driver is required. This error does not occur on most machines, but it might occur on a high-end server.
Setup could not find any hard drives in your computer	The required boot device drivers for the hard drives are not loaded.

Boot-Start Driver Distribution Disk

A boot-start driver distribution disk is a medium, such as a floppy disk or USB flash drive, that contains a TxtSetup.oem file and the related driver files. The TxtSetup.oem file is a text file that contains a list of hardware components, a list of files on the distribution disk that will be copied to the system, and a list of registry keys and values that will be created. A sample TxtSetup.oem file is provided with the Windows Driver Kit (WDK), under the src directory of the WDK. For details about the contents of a TxtSetup.oem file, see TxtSetup.oem File Format.

The following requirements and recommendations apply to platform-specific and cross-platform distributions disks:

Platform-specific distribution disks (Windows Server 2003 and earlier)
Windows requires a platform-specific distribution disk for each platform that a driver supports. A platform-specific distribution disk contains one TxtSetup.oem file and the related driver files. The TxtSetup.oem file must be located in the root directory of the distribution disk.
Cross-platform and platform-specific distribution disks (Windows Server 2003 Service Pack 1 (SP1) and later versions)
Windows supports cross-platform distribution disks that contain two or more platform-specific TxtSetup.oem files and the related driver files.
To distinguish between platforms on a cross-platform distribution disk, use the platform directories that are listed in the following table.
Platform Platform directory Default directory
x86-based
A:i386
A:
Itanium-based
Download ads usb devices driver. A:ia64
A:
x64-based
A:amd64
A:

Platform	Platform directory	Default directory
x86-based	A:i386	A:
Itanium-based	Download ads usb devices driver. A:ia64	A:
x64-based	A:amd64	A:

On a cross-platform distribution disk, Windows uses the platform-specific TxtSetup.oem file that is located in the platform directory that corresponds to the platform on which Windows is running. If a corresponding platform directory that contains a platform-specific TxtSetup.oem file does not exist, Windows uses the TxtSetup.oem file in the default directory, if one is present.

Windows also supports platform-specific distribution disks. A platform-specific distribution disk contains one platform-specific TxtSetup.oem file and the related driver files. The TxtSetup.oem file must be located either in its corresponding platform directory, as is done for cross-platform distribution disks, or in the default directory of the distribution disk.

The driver files for a given platform on a cross-platform distribution disk or on a platform-specific distribution disk must be located relative to the directory that contains the platform-specific TxtSetup.oem file.

Tip Although not required, we recommend that a TxtSetup.oem file always be placed in a corresponding platform directory. Using platform directories eliminates the possibility that Windows might attempt to use a TxtSetup.oem file that is incompatible with the platform on which Windows is running. For example, if a user attempts an unattended installation on a platform with a distribution disk that does not contain a corresponding platform directory, Windows cannot determine whether the TxtSetup.oem file in the default directory is compatible with the platform. If a driver fails to load because the driver is incompatible with the platform, Windows displays an error message and terminates the unattended installation.

This document gives instructions on how you can setup an electronic cash drawer to work with The Business Edge 2.0

Purchase Cash drawer & USB Adapter

The Business Edge 2.0 will work with most cash drawer systems. At this time we are advising our clients to purchase their cash drawer supplies from safescan.com including:

SAFESCAN SD-3540 STANDARD-DUTY CASH DRAWER ($79)
SAFESCAN UC-100 USB CASH DRAWER TRIGGER ($45)

The cash drawer has an RJ12 Interface which will plug into the USB drawer trigger interface and allow you to connect the cash drawer to your computer.

Connect Cash Drawer to Computer

Unpack the cash drawer and the USB Cash Drawer Trigger. Connect the RJ12 cable from the cash drawer to the USB Cash Drawer Trigger via the ‘Drawer’ interface. Connect the USB cable to the USB Cash Drawer Trigger via the ‘USB’ interface, and connect the other end of the USB cable to your windows computer.

Once you connect the USB Cash Drawer Trigger to your computer, the device should be detected and drivers will automatically be installed.

You can verify that your device has been detected by opening the Device Manager. The USB Cash Drawer Trigger device driver shows up as “Prolific USB-to-Serial Comm Port” and is automatically assigned to a COM port.
To View or change the COM port, you will first need to open the device in the device manager by double-clicking it.
You may then click the “Advanced” button to show the advanced settings, which includes COM port number. To change the COM port, simply select the desired COM port from

Ask Computer Electronic Driver